• EPA registered for fogging as part of normal cleaning and disinfection procedures
• No toxic aldehyde vapors
• Much faster and safer to use than existing aldehyde based disinfectants
• Very effective bactericide, fungicide, virucide and sporicide
• Fully biodegradable
• Contains only pharmaceutical quality raw materials
• Less corrosive than aldehyde based liquids

Additional advantages associated with the use of the Minncare Dry Fog System:

• Substantially lower cleanroom downtime.
• Regular use may contribute to maintaining low particulate levels due to the suppression of airborne particles by the droplets.
• Lack of noise and ultrasonic vibration during use.
• Use of the Dry Fog Vapor Detection system allows users to verify absence of residual Minncare vapors prior to putting the rooms back into use.
• Can be used in clean rooms in a variety of facilities including:
  - Pharmaceutical
  - Biotechnology
  - Animal research facilities
  - Medical device manufacturers

Optimized System
The Minncare Dry Fog system provides an easy to use, high technology solution for clean room and critical area fogging. The combination of our highly effective Minncare cold sterilant chemical and our state of the art Dry Fog delivery system enables users to rapidly and safely deliver Minncare vapor to even the most complex areas. Its sanitary and autoclavable design will permit its use in the most critical areas within pharmaceutical and other industries concerned with maintaining the utmost levels of sterility.

The location and action of the dry fogging head at the highest point of the equipment allows for rapid vapor dispersion and ensures that the most distant areas are reached effectively.

Short Process Time
The lack of toxic aldehyde vapors results in extremely short process times—over 95% faster than some conventional systems. This means less production downtime and lower total costs. Typically, the entire process can be completed in less than 3 hours, depending upon room size and ventilation system efficiency, compared to up to 3-5 days with some conventional systems.

Ultrafine Droplets
The Dry Fog equipment is designed to produce fine droplets that average 7.5 microns in diameter which will ensure even dispersion of the Minncare solution throughout the room. These small droplets will tend to bounce off of solid surfaces and thus avoid excessive condensation, corrosion and surface wetting issues associated with systems producing larger droplets. The small droplets evaporate and the vapor will penetrate normally inaccessible areas and lead to a more effective process.

Highly Flexible System
The system is easily adaptable to differing room dimensions and configurations and can be adjusted to suit any room height. It is readily transportable and can be used in multiple locations, needing only a compressed air source to operate. It will deliver an adequate solution quantity to rooms up to 35,000ft3 (1000m3). Beyond this size, multiple machines may be required.

Optimal Efficacy
Minncare Cold Sterilant is a peracetic acid and hydrogen peroxide based proprietary chemistry developed by Minntech for optimized biocidal efficacy. It is registered by the EPA for use as a fog to enhance existing cleaning and disinfection process. It is fully biodegradable and will leave no measurable air residuals once the room has been fully ventilated. Minncare Cold Sterilant contains only pharmaceutical quality raw materials, limiting the introduction of any undesirable components into the clean room environment.